Part Number Hot Search : 
74HCT109 5KE200A BNBSP 2SD2114K FDUE1245 MUR160 TDA9109 PT100
Product Description
Full Text Search
 

To Download T2500D Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 T2500D Triacs
Silicon Bidirectional Thyristors
Designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies. * Blocking Voltage 400 Volts * All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and Stability * Small, Rugged, Thermowatt Construction for Low Thermal Resistance, High Heat Dissipation and Durability * High Surge Current Capability 60 Amps Peak at TC = 80C * Device Marking: Logo, Device Type, e.g., T2500D, Date Code
MAXIMUM RATINGS (TJ = 25C unless otherwise noted)
Rating Peak Repetitive Off-State Voltage(1) (Sine Wave 50 to 60 Hz, TJ = -40 to +100C, Gate Open) On-State RMS Current (TC = +80C) (Full Cycle Sine Wave 50 to 60 Hz) Peak Non-repetitive Surge Current (One Full Cycle, 60 Hz, TC = +80C) Circuit Fusing Considerations (t = 8.3 ms) Peak Gate Power (TC = +80C, Pulse Width = 10 sec) Average Gate Power (TC = +80C, t = 8.3 ms) Peak Gate Current (Pulse Width = 10 sec) Operating Junction Temperature Range Storage Temperature Range Symbol VDRM, VRRM IT(RMS) Value 400 Unit Volts 4 6.0 A
http://onsemi.com
TRIACS 6 AMPERES RMS 400 VOLTS
MT2 G MT1
ITSM I2t PGM PG(AV) IGM TJ Tstg
60 15 16 0.2 4.0 - 40 to +125 - 40 to +150
A A2s Watts Watt 1 2
3
TO-220AB CASE 221A STYLE 4
PIN ASSIGNMENT
A C C 1 2 3 4 Main Terminal 1 Main Terminal 2 Gate Main Terminal 2
(1) VDRM, VRRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
ORDERING INFORMATION
Device T2500D Package TO220AB Shipping 500/Box
(c) Semiconductor Components Industries, LLC, 1999
1
February, 2000 - Rev. 2
Publication Order Number: T2500/D
T2500D
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance -- Junction to Case Maximum Lead Temperature for Soldering Purposes 1/8 from Case for 10 Seconds Symbol RJC TL Value 2.7 260 Unit C/W C
ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted; Electricals apply in both directions)
Characteristic Symbol Min Typ Max Unit
OFF CHARACTERISTICS
Peak Repetitive Blocking Current (Rated VDRM, VRRM; Gate Open) TJ = 25C TJ = 100C IDRM, IRRM -- -- 10 2.0 A mA
ON CHARACTERISTICS
Peak On-State Voltage* (ITM = A Peak)
"30
VTM IGT
--
--
2.0
Volts mA
Gate Trigger Current (Continuous dc) (VD = 12 Vdc, RL = 100 Ohms) MT2(+), G(+) MT2(+), G(-) MT2(-), G(-) MT2(-), G(+) Gate Trigger Voltage (Continuous dc) (All Four Quadrants) (VD = 12 Vdc, RL = 100 Ohms) Gate Non-Trigger Voltage (VD = 12 V, RL = 100 Ohms, TC = 100C) Holding Current (Main Terminal Voltage = 12 Vdc, Gate Open, Initiating Current = mA)
-- -- -- -- VGT VGD IH -- 0.2 --
10 20 15 30 1.25 -- 15
25 60 25 60 2.5 -- 30 Volts Volts mA
"200
Gate Controlled Turn-On Time (Rated VDRM, IT = 10 A , IGT = 160 mA, Rise Time = 0.1 s)
tgt
--
1.6
--
s
DYNAMIC CHARACTERISTICS
Critical Rate-of-Rise of Commutation Voltage (Rated VDRM, IT(RMS) = 6 A, Commutating di/dt = 3.2 A/ms, Gate Unenergized, TC = 80C) Critical Rate-of-Rise of Off-State Voltage (Rated VDRM, Exponential Voltage Rise, Gate Open, TC = 100C) * Pulse Test: Pulse Width 2.0 ms, Duty Cycle 2%. dv/dt(c) -- 10 -- V/s
dv/dt
--
75
--
V/s
http://onsemi.com
2
T2500D
Voltage Current Characteristic of Triacs (Bidirectional Device)
+ Current Quadrant 1 MainTerminal 2 +
Symbol
VDRM IDRM VRRM IRRM VTM IH
Parameter
Peak Repetitive Forward Off State Voltage Peak Forward Blocking Current Peak Repetitive Reverse Off State Voltage Peak Reverse Blocking Current Maximum On State Voltage Holding Current IH Quadrant 3 VTM MainTerminal 2 - IRRM at VRRM on state
VTM IH
off state
+ Voltage IDRM at VDRM
Quadrant Definitions for a Triac
MT2 POSITIVE (Positive Half Cycle) +
(+) MT2
(+) MT2
Quadrant II
(-) IGT GATE MT1 REF
(+) IGT GATE MT1 REF
Quadrant I
IGT - (-) MT2 (-) MT2
+ IGT
Quadrant III
(-) IGT GATE MT1 REF
(+) IGT GATE MT1 REF
Quadrant IV
- MT2 NEGATIVE (Negative Half Cycle) All polarities are referenced to MT1. With in-phase signals (using standard AC lines) quadrants I and III are used.
http://onsemi.com
3
T2500D
PACKAGE DIMENSIONS
TO-220AB CASE 221A-07 ISSUE Z
-T- B F C
SEATING PLANE
T
S
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 --- --- 0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.36 0.55 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 --- --- 2.04
4
Q
123
A U K
H Z L V G D N J R
STYLE 4: PIN 1. 2. 3. 4.
MAIN TERMINAL 1 MAIN TERMINAL 2 GATE MAIN TERMINAL 2
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (M-F 1:00pm to 5:00pm Munich Time) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (M-F 1:00pm to 5:00pm Toulouse Time) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (M-F 12:00pm to 5:00pm UK Time) Email: ONlit@hibbertco.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, England, Ireland CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5740-2745 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local Sales Representative.
http://onsemi.com
4
T2500/D


▲Up To Search▲   

 
Price & Availability of T2500D

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X